Products
CEER is an official dealer of wind measuring equipment manufacturers NRG, Thies, Ammonit and ZX Lidars
Anemometers
Anemometer NRG 40C
The 40C was one of the first anemometers developed exclusively for wind power. The 40C anemometer recorded a wind speed of 96 m/s (214 mph). Due to the linearity of the output signal, these sensors are ideal for use with various data acquisition systems. A four-pole magnet induces a sinusoidal voltage in the coil, creating an output signal with a frequency proportional to the wind speed.
Anemometer NRG S1
The NRG S1 anemometer provides a unique balance of high accuracy and low cost, making it ideal for increasing measurement accuracy in wind resource assessment campaigns. The proven bearing system and the robust construction of the metal housing ensure reliable operation of the sensor for many years in various conditions.
Anemometer NRG 40H
The 40H model is based on the NRG 40C anemometer, one of the first anemometers developed exclusively for wind power. This version of the sensor is based on the Hall effect, especially for environments with electrical noise that require a rectangular signal. 40H.
RM YOUNG 27106T Vertical Anemometer
Wind farm developers and turbine manufacturers are increasingly seeking to understand the vertical component of wind speed. The RM Young 27106T is a precision airspeed measuring instrument designed to meet this need. This dynamic sensor reacts precisely to the component of the air flow that is parallel to the axis of its rotation.
Hybrid Anemometer XT| WRA
The XT|WRA hybrid anemometer uses proven heating technology to support operational weather towers used for forecasting and analysis. The Hybrid XT technology from NRG is based on 20 years of experience in using sensors. Hybrid XT sensors have a two-stage anti-pollution system that prevents damage to bearings by dust, dirt and water.. This sensor is well suited for use in sudden temperature drops below zero, when other sensors may freeze.
Wind vanes
Wind vane NRG 200M
The 200M wind direction wind vane is equipped with an extremely precise sensing element that does not create a dead zone, providing less error and continuous 360° measurement.
Hybrid wind vane XT | WRA
Reliably measure wind direction during icing and extreme weather conditions with the XT|WRA hybrid wind vane.
Other weather sensors
Barometer pressure sensor NRG BP65
The NRG BP65 pressure sensor is well suited for pressure measurement in remote wind and solar energy studies, especially as input data for calculating air density and annual energy production. The robust housing protects the high-precision sensing element, ensuring reliable operation in various climatic conditions and conditions.
Temperature sensor NRG T60
A new generation ambient temperature sensor, providing increased temperature measurement accuracy and long-term reliability in harsh conditions. The T60 is ideal for temperature measurement in remote studies of wind and solar energy.The recommended use of this sensor data includes energy density calculations; air temperature monitoring; calculation of atmospheric stability conditions; determination of icing conditions in cold climates; and evaluation of the efficiency of photovoltaic panels, which depends on temperature.
Relative humidity sensor NRG RH5X
RH5X is a relative humidity sensor for continuous measurement. The RH5X is equipped with a polymer resistor sensor that provides excellent linearity and sensitivity with a short response time and long-term stability.
SYMPHONIEPRO Data Logger
SymphoniePRO is an industrial—grade, low-energy data logging system specifically designed to assess resources for the renewable energy industry. With options for a 26-channel or 16-channel mounting panel, the measuring capabilities of the recorder can be optimized as needed. The statistical values of each channel are calculated based on continuous 1-second data samples and averaged over a user-selected interval. The collected data is effectively stored as binary files.
SYMPHONIE IPACK
iPackACCESS is a communication and power module for SymphoniePRO data loggers that allows wind farm operators to integrate real—time meteorological data into their SCADA (Dispatch Control and Data acquisition) systems via a Modbus TCP or LTE-G cellular network.
Thies
Thies First class – Anemometer
The wind sensor is designed to register the horizontal component of wind speed in the field of meteorology and nature measuring equipment, measuring the power characteristics of wind power plants. In flat terrain, the wind converter meets all the requirements of IEC 61400-12-1 for an instrument of accuracy class 0.5 (classification class S).
Thies First class – Thies Wind vane
The wind sensor is designed to register the horizontal component of the wind direction in the field of meteorology and environmental measurement technology, to assess the location and measure the power characteristics of wind power systems.
Ultrasonic anemometer
Ultrasonic anemometers allow you to measure rapidly changing wind parameters due to their acoustic measurement principle. The values of gusts and peaks are obtained without inertia with the highest accuracy.
Temperature sensors – measurement of air temperature using temperature-dependent resistances
An electric temperature sensor measures the air temperature through a temperature-dependent resistance. The temperature value can be read directly as a resistance value, depending on the sensor, or converted by internal electronics into an analog standard signal.
Pressure sensors
Electrical sensors that measure the air pressure inside using electromechanical components. Due to their small size, these sensors are quite insensitive to mechanical influences. The built-in electronics converts the measured information into electrical signals and transmits them.
Ammonit
Meteo-40 plus
Assessment of wind and solar resources, Monitoring of wind power plants (SCADA), Performance measurements. The Meteo-40 web interface offers all available configuration options
